Riga Foot
data sheet
Riga Foot
data sheetRIGA FOOT
Riga Foot
data sheet
Riga Foot
data sheet
Product
Application
Flooring in transport industry, storage and factory floors, storage shelves,
loading platforms, pier surfaces, scaffoldings, playgrounds, and flight cases.
In general – surfaces where high wear resistance, anti- slip properties and good
visual appearance are required.
Further processing
Plywood can be machined with wood working tools: cutting, drilling, milling,
jointing in length, tongue and groove (T&G), half laps, profiled edges
etc.Advantages
Surface with high wear resistance, anti- slip properties, good visual
appearance (decorative surface), water proof, resists commonly used chemicals
and easy to clean.
User and environmentally friendly, hygienic.
Birch plywood (Riga Ply) overlaid with phenol (dark brown, green) or UV-resistant (grey) film on both sides. Face side is with special surface pattern (WT). The reverse is smooth (F).
Gluing classes
Plywood is glued with waterproof phenol formaldehyde resin adhesive. Bonding
is resistant to weather and boiling water. It meets requirements of the
following standards:
EN 314 / 3 rd Class;
BS 1203 / H4 (previously WBP);
DIN 68705 Part 3 / Type BFU 100.
Formaldehyde emission
In accordance with the standard EN 13986 formaldehyde emission
meets the Class E1 requirements. Test method EN 717 Part 2.
Surface pattern
The panels are overlaid with a phenol film and have a special pattern
imprinted during hot pressing process.
Anti- slip Class in accordance with DIN 51130 R 10.
Results of wear resistance tests are summarized in table below.
|
Type of overlay |
Taber test results, revolutions |
Rolling test results, revolutions |
|
Riga Foot |
|
|
Edges sealing
Edges of the panels are sealed with acrylic paint.
Sizes
1220 mm x 2440 / 3050 mm
1250 mm x 2500 / 3000 mm
1500 mm x 2500 / 3000 mm
1525 mm x 2440 / 3050 mm
Cut to size panels and machining available in accordance with customers’
requirements.
Thickness
6.5, 9, 12, 15,
18, 21, 24, 27, 30, 35 mm.
Tolerance
Size and right angle tolerance meet the standard EN 315
requirements.
|
Nominal thickness, mm |
6,5 |
9 |
12 |
15 |
18 |
21 |
24 |
27 |
30 |
35 |
|
No. of plies |
5 |
7 |
9 |
11 |
13 |
15 |
17 |
19 |
21 |
25 |
|
Average actual thickness, mm |
6,4 |
9,2 |
12,0 |
14,9 |
17,7 |
20,5 |
23,4 |
26,5 |
29,4 |
35,5 |
|
Lower limit, mm |
6,1 |
8,8 |
11,5 |
14,3 |
17,1 |
20,0 |
22,9 |
25,8 |
28,7 |
33,6 |
|
Upper limit, mm |
6,9 |
9,5 |
12,5 |
15,3 |
18,1 |
20,9 |
23,7 |
26,8 |
29,9 |
35,4 |
|
Parameter |
Tolerance |
|
Length, width (mm) |
|
|
Right angle |
± 0,1 % |
|
Edge straightness |
± 0,1 % |
Plywood is manufactured by Latvijas Finieris AS whose Quality
Management System is certified to the requirements of ISO 9001 by
Bureau Veritas Quality International.
